Yes, all of my holsters can be made left or right handed.
What type of clips do you suggest?
The standard seem to be the most popular. I personally think that the standard clips are the most stable. But I do have quite a few orders for the J clips and C clips. With my IWB holsters all the clips are interchangable. Extra clips can always be ordered.
How do I get extra clips or replace a broken clip for my tuckable holster?
Kydex clips have a 90 day warranty from the date of purchase for the original purchaser. The kydex clips are well made and sturdy however they are not metal and are not indestructible. Care should be taken when putting the holster on or taking it off. Do not use the clips as a handle to remove your holster. You should pull the clip (standard & P clips) out just enough to release it from the belt and then grip the holster to remove it from your waistband. If your clip is broken and under warranty you must contact me by email before sending it back for a replacement. If you need extra clips they can be ordered through email for $8 per clip. Shipping is $2 for small orders.
My belt slots are snug. Is this normal?
They are made to be snug and do require some break in. My belt slots/loops are made to fit my belts which are approximately 1/4" thick and work fine for most other belts. I cannot guarantee that they will fit every belt out there since other belt makers may use thicker or thinner leather to make their belts.
I need my holster in a hurry. Can you do this?
Everything is made per order and we do not normally keep anything in stock. If you need your order quickly we do offer an expedite service on all our standard products only. This will not include exotics, horsehide or any type of custom work, no exceptions. Please do not ask. The charge will be $40 extra per item to ship within 7 - 10 business days, excluding weekends and holidays, pending payment and verification. The expedited orders will be made with the help of our oldest son who works part time with us while going to college. By having the extra help it allows us to offer the expedited option without affecting our other customer's turn around time. Please contact us for more information.
What is the internal stiffener for belts and do I need it?
The internal stiffener is a strip of woven nylon webbing. It is sewn between the two layers of the belt. The internal stiffener greatly reinforces the belt while still allowing the belt to take on the natural curve of the body with break in. In my opinion and in most cases for a 1 1/2" dual layer gun belt the internal stiffener is not needed for carrying normal CCW gear unless you just really like a stiff belt. If you plan on carrying a lot of heavy gear then this may be an option to consider for greater support. Also, my 1 1/4" belts are usually sufficient for normal CCW gear as well, however, if you plan on carrying a large or heavy handgun, or a high ride top heavy holster this may be a good option for you.
Disclaimer:
Firearm Safety is your responsibility!
R Grizzle Leather holsters are made to fit standard factory equipped handguns only. Modifications including but not limited to extended slide releases, trigger shoes, laser sights, or any addition or alteration to the frame or external dimensions of the handgun itself may cause the holster to fit improperly and could increase the risk of accidental discharge. It is the responsibility of the purchaser or user to use firearm safety and R Grizzle Leather is not responsible for damage, personal injury, or death due to misuse or negligent use of firearms or holsters. Your handgun holster or accessory is designed only to be used with the type of handgun or handgun accessory it was specifically designed for as labeled on the back of the holster or accessory. No attempt should ever be made to alter or modify an R Grizzle Leather holster by anyone other than an R Grizzle Leather employee. All holsters should be inspected before, during, and after each use by user for damage, worn parts, or loose stitching. Should the holster become loose, worn, defective, or ill fitting at any time, cease use immediately. Upon purchase of the holster or accessory it is the sole responsibility of the purchaser or user, not the manufacturer, to deem that the holster or accessory is safe and fit for their intended use. All risk and liability shall be on the purchaser and/or user of the holsters and/or accessories in the manner in which they are worn and used. Always make sure you test the holster for proper fit and retention with an unloaded hand gun before use. Extreme caution should be used during any vigorous activity, such as but not limited to running, to insure that the firearm remains seated fully in the holster. By purchasing an R Grizzle Leather holster or product you hereby acknowledge that firearms are dangerous and release R Grizzle Leather, its owners, its associates, and employees from any and all liability for injuries or accidents relating to the use of the holster, accessory or any firearm.